background image

23

22

PROGRAMMING 

AUDIO CONTROL

Using the Dolphin’s RCVR mode, you can also
control an audio component, such as a stereo
receiver or a stereo amplifier.

Locate the brand name of your audio component
in one of accompanying code lists. Write it in the
appropriate space.

Stereo Receiver Brand: 

or

Stereo Amplifier Brand: 

The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your audio component:

1. Turn on the audio component.

2. On the Dolphin, press RCVR once. Press and

hold SETUP until the LED blinks twice, then
release SETUP.

3. Enter the four-digit code for your audio

component. If you perform this procedure
correctly, the LED will blink twice.

NOTE: If the LED did not blink twice after
entering the code’s last digit, repeat steps 
2 through 3 and try entering the same 
code again.

4. Aim the Dolphin at your audio component and

press POWER once. The unit should turn off. If
it does not respond, repeat steps 2-4, trying
each code listed for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 25).

5. Write your audio component code in the boxes

below for future reference.

■ ■

■ ■

■ ■

NOTE: Remember to use the Dolphin to operate
your audio component, press RCVR first.

Setup Codes for 

Stereo Receivers:

ADC

0531

Adcom

0616

Aiwa

1089, 1405, 0121

Akai

0224, 0076

Capetronic

0531

Carver

1089, 1189, 0042, 0360, 0008

Casio

0195

Clarinette

0195

Denon

1104, 1160, 0273, 0771

Emerson

0424, 0255

Fisher

0042, 0360, 0219

Garrard

0463, 0424

Harman/Kardon

0110, 0891

Inkel

0062

JBL

0110

JVC

0074

Kenwood

1313, 1027, 1570, 1569, 0186, 
0042, 0077, 0569

Koss

0424, 0255

LXI

0181

Lexicon

1076

Lloyd's

0195

MCS

0039, 0346

Magnavox

1089, 1189, 0531, 0195, 0391, 0128

Marantz

1089, 1189, 0039, 0128, 0200

Modulaire

0195

NAD

0320

NEC

0235

Nakamichi

0097, 0347

Onkyo

0135, 0100, 0380

Optimus

1023, 0531, 0670, 0186, 0738, 
0801, 0042, 0181, 0219, 0177

Panasonic

1518, 0039, 0518

Penney

0195

Philips

1089, 1189, 1269, 1120

Philips

0391

Pioneer

1023, 0531, 0150, 0630

Proscan

1254

Quasar

0039

RCA

1023, 1254, 0531, 0360, 1154, 
0346, 0530

Realistic

0195, 0181, 0163

Sansui

089, 0346, 0193

Sanyo

0801, 0219

Scott

0322, 0163

Semivox

0255

Sharp

0186

Sherwood

0491, 0502, 0062

Sony

1058, 1158, 1258, 0474, 0168

Soundesign

0670

Sunfire

1313

Teac

0463, 0163

Technics

1308, 1309, 1518, 0039, 0208, 0518

Thorens

1189

Victor

0074

Yamaha

0176, 1176, 0186

Yorx

0195

Zenith

0857

Summary of Contents for Dolphin




















Reviews: