SETTING VOLUME LOCK
The Dolphin can be set so that the volume control
buttons will always control the same device no
matter which device mode is selected.
If your TV is not remote controllable, or if you
would like the volume to be controlled by a
different component, you can change the Volume
Lock setting to control volume through a
non-associated mode (e.g., through the cable in
the TV mode).
To Change Volume Lock to the CBL/SAT
mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press CBL/SAT once.
The LED will blink twice.
3. Now ,whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your Cable Converter or Satellite.
To Change Volume Lock to the TV mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press TV once. The
LED will blink twice.
3. Now, whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your TV.
To Change Volume Lock to the VCR mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press VCR once. The
LED will blink twice.
3. Now, whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your VCR.
To Change Volume Lock to the DVD mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press DVD once. The
LED will blink twice.
3. Now, whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your DVD Player.
28
29
To Change Volume Lock to the CD mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press CD once. The
LED will blink twice.
3. Now, whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your CD Player.
To Change Volume Lock to the RCVR mode:
NOTE: Performing these steps will allow you to
access the volume control of your audio component
in all modes.
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press RCVR once. The
LED will blink twice.
3. Now, whenever you press , Volume –,
or MUTE on the Dolphin, volume will be
controlled by your audio component.
Clearing Volume Lock
The volume lock can be cleared so that the volume
control buttons will control whatever device is
selected.
To clear the volume lock:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press Volume Up. The
LED will blink 4 times when unlocked.
Clearing Volume Lock For One Device
The volume lock can be cleared for one specific
device so that the volume control buttons will
control that device when it is selected.
To clear the volume lock for a specific device:
1. Press the device key for the unit to be
unlocked.
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press Volume Down.
The LED will blink 4 times when unlocked.
