Baker Double Notcher - Rev 2, 09/07; WWW.BAKER-ONLINE.COM
5
Manual Contents Notice
This manual is not totally comprehensive. It does not and cannot convey every possible
safety and operational problem that may arise while using this machine. The manual will
cover many of the basic and specific safety procedures needed in an industrial
environment.
All federal and state laws and any regulations having jurisdiction covering the safety
requirements for use of this machine take precedence over the statements in this manual.
Users of this machine must adhere to such regulations.
Machine Specifications and Requirements
Power
•
(Two) 30 HP (22 kw)
TEFC Motors (one per
cutter head)
•
1 HP (.75 kw) TEFC
Motor for descrambler
Operating Air Pressure
•
120 psi 1/2” (13mm) 30
CFM
* Pushers are air driven with
electrical controlled travel
limit switches
Cutting Capacity
Material Size:
•
2x4’s; 4x4’s; 4x6’s length
•
28 in up to 76 in (71 cm
to 193 cm) standard
Notch Depth
•
0” (0 mm) min.
•
3” (76 mm) max.
Notch Length
•
9” (229 mm) standard
Dimensions & Weight
Length:
90” (229 cm)
Width:
101” (256 cm)
Height:
78” (198 cm)
Table-top Height:
35” (89 cm)
Weight:
4,000 lbs (1,814 kg)
Production Rate
•
Pusher cycles 4,000 per hour
Cutters
•
(Two) 12” (305 mm) diameter x
9” (229 mm) long with indexable,
replaceable tips in 1/2” (13mm)
segments - standard
Arbors
•
(Two) 2 ½” (64 mm) diameter x
10” (254 mm) long
Sawdust Removal
•
10” (254mm) outlet; min. 3,600
CFM suction recommended at
dust removal chute
