Baker Double Notcher - Rev 2, 09/07
;
WWW.BAKER-ONLINE.COM
19
Adjusting the Width of the Material Bin Hopper
The material bin hopper allows both manual feed and optional descrambler feed to the
pusher to produce notched stringers. Stringers are stacked singularly in the feed bin hopper.
To properly set the material bin hopper depth, tighten or loosen the adjuster nuts
accordingly.
The opening between the bin and the backstop should be 1/2” (13mm) greater than the
thickness of the material being fed in order to avoid jamming. For example, if the width of
the material is 1 ½” (38mm), set the bin width or depth to 2” (50mm).
Figure 19
Back Stop
Adjuster Nuts
Feed Bin Hopper
