Baker Hughes Waygate Everest Ca-Zoom HD, Operating Instructions Manual

Page: 11 / 85

Everest Ca-Zoom HD
3068-7-0001 Rev. d Version 1.0 Page 1-5
CAUTION
Cameras comprise STRONG LIGHTS for illumination.
Do not look directly into the lights when switched on:
temporary blinding might occur.
Check nobody can stare at the cameras when the lights
are switched on.
It is only permitted to activate lights in an environment
where
no personnel can stay in the camera field of view .
Access must be restricted to non-authorized personnel
IEC 60825-1
WARNING
Cameras integrate two class 1 lasers
as per IEC 60285-1:2014 applicable to safety of laser
products.
PTZ HD30 laser types: 2 red parallel lines, dist. 22 mm (0.87’)
TZ1 HD laser types: 2 red dots, dist. 27.5 mm (1.08’).
Glare if operators stare into laser beam or laser beam
reflections.
Under normal operation conditions (operations which can
be foreseen rationally) it is guaranteed as a safety laser.
No maintenance is authorized on the laser.
Do not power the device if it appears to be damaged (no
signal or housing broken).
Additional measures are not necessary to maintain laser
safety.
Do not stare into the laser beam , even to reflected beam .
Always observe laser dot reflections on objects of interest
on the screen of the Control Station
POWER
LEDS
CLASS 1
LASER
PRODUCT