Baker Hughes Waygate Everest Ca-Zoom HD, Operating Instructions Manual

Page: 20 / 85

Everest Ca-Zoom HD
Page 2-2 3068-7-0001 Rev. d Version 1.0
2.2.1 PTZHD30 Camera
Figure 2. PTZHD30 Camera
1 Light emitters 3 Lens and image sensor
2 Laser line emitters, class 1 4 Valve seal screw
Light emitters (1): The integrated lighting ensures optimum illumination of the
immediate surroundings. The current LED technology enables high light output with
low heat generation. Therefore, this lighting is also suitable for dry use without
restrictions.
The upper and lower LED pairs can be switched on separately.
Laser line emitters (2) (optional): When the laser is activated, two parallel lines are
projected into the inspection area at a constant distance. Using this reference
value, it is possible to measure details in the inspection area.
For details see chapter 9.1.
Lens (3): The lens is protected by a glass pane from external influences. This glass
may only be cleaned with a soft wipe.
Valve seal screw (4): This screw protects the compressed air valve and seals it
against higher outside pressures. Compressed air must be applied to the camera
head for underwater use. This protects the high-quality electronics in the event of
leakage.