Baker Hughes Waygate Everest Ca-Zoom HD, Operating Instructions Manual

Page: 12 / 85

Everest Ca-Zoom HD
Page 1-6 3068-7-0001 Rev. d Version 1.0
1.4 Basic safety instructions

Take the required measures before installing the equipment and during the
operation.

Avoid any risk of cable interference with persons or objects that can
potentially move.

Never tension the cable(s).
 Roll up and attach cables with a binder when they are not used.

Do not lay cables in walking areas, if this is not possible, use cable bridges.

Safely attach cables at height with binders on vertical supports or guardrails
when possible.
1.5 Operator responsibilities
As the Everest Ca-Zoom HD System is used in the industrial field, the operator is
subject to the statutory obligations to work safety. In addition to the work safety
instructions in this operating manual, the safety, accident prevention and
environmental protection regulations applicable to the system must be complied
with.
The operator:

makes a risk assessment, where the additional hazards that result from the
specific working conditions at the place of use of the system are determined.
 takes the required measures to eliminate or mitigate risks and applies safe
work site practices.

provides appropriate Personal Protective Equipment for the personnel (see
chapter 1.8) and checks the correct use of the required PPE during all the
work.

regularly informs the staff of the possible dangers and the applicable safety
and health measures.
 informs the staff about the applicable occupational health and safety
regulations.

ensures that personnel and equipment transport (access to worksite, egress
from worksite) is organized as per safety general and local regulations.