Baker Hughes Panametrics MTS6, User Manual

Page: 76 / 106

Chapter 5. Specifications
68 Moisture Target Series 6 User’s Manual
Input Power:
option 1, AC: universal power 100-240 VAC @ 50-60 Hz
option 2, DC: 24 VDC nominal ±10%
Power Dissipation:
AC units: 5 W maximum
DC units: 5 W maximum
Temperature:
operating: –20° to +60°C
storage: –40° to +70°C
Warm-Up Time:
meets specified accuracy within three minutes
Dimensions:
panel-mount: 2.24 x 4.09 x 4.79 in. (H x W x D)
(57 x 104 x 121.78 mm)
cutout required: 1.81 x 3.69 in. (H x W)
(46 x 93.6 mm)
board-mount: 5.9 x 5.1 x 2.2 in. (H x W x D)
(150 x 130 x 56 mm)
European Compliance:
complies with EMC Directive 2004/108/EC and 2006/95/EC Low Voltage Directive (Installation Category II,
Pollution Degree II)
5.2 Moisture Measurement
Sensor Type:
thin-film aluminum oxide moisture sensor probe
Moisture Probe Compatibility:
compatible with all Panametrics M-Series aluminum oxide moisture probes and
VeriDri
transmitters
Traceability:
All moisture probe calibrations are traceable to National Institute of Standards and Technology (NIST) standards
or National Physical Lab, U.K. (NPL) as accredited by Irish National Accreditation Board (INAB).
Probe Cable Length:
M Series
: 2,000 ft (600 m) maximum
VeriDri
: 1,000 ft (300 m) maximum
Moisture Probe Pressure Rating:
M1 : 5 microns Hg to 75 psig (5 barg)
M2 : 5 microns Hg to 5,000 psig (345 barg)
VeriDri : 5 microns Hg to 5,000 psig (345 barg)
Dew/Frost Point Temperature:
Overall Calibration Range:
–110° to 60°C
Available Calibration Range Options:
Standard: –80° to 20°C with data to –110°C
Extended High: –80° to 60°C with data to –110°C