Baker Hughes Panametrics MTS6, User Manual

Page: 38 / 106

Chapter 3. Operation and Programming
30 Moisture Target Series 6 User’s Manual
3.3.3 Selecting an Output Type
Note: Before changing the output type, refer to Section 2.2 Selecting the Recorder Output on page 4 to make sure
that Switch S1 is at the correct setting (V for voltage or I for current).
To change the output type, from the
Output Menu
select
Type
and press
Enter
. A
screen similar to the following appears:
Use the arrow keys to select a new output type. Press Enter to save (or Cancel to
keep the previous value), and return to the Output Menu .
3.3.4 Changing the Upper Output Span
To adjust the upper output span, from the
Output Menu
select
Upper
and press
Enter . A screen similar to the following appears.
Use the left and right arrow keys to select each digit to be changed and the up and
down arrow keys to increase or decrease its value. Press
Enter
to save (or
Cancel
to keep the previous value), and return to
Output Menu
.
Units
Upper
Lower
Test
Trim...
Output Menu
Type

=Accept
Select Output Type:
0-20mA
4-20mA
Output Menu
0-2V
=Cancel


Type
Units
Lower
Test
Trim...
Output Menu
Upper

+060.0 DP °C
/=Save =Cancel
+60.0
Set Output Span
Max:
–110.0
Min:

