© 2021 Baker Hughes Company. All rights reserved. Masoneilan SVi1000 Positioner Quick Start Guide | 9
SVi1000 Product Safety
For SVi1000 positioners intended for use with industrial compressed air:
Ensure that an adequate pressure relief provision is installed when the application of system
supply pressure could cause peripheral equipment to malfunction. Installation must be in
accordance with local and national compressed air and instrumentation codes.
General installation, maintenance or replacement
•
Products must be installed in compliance with all local and national codes and standards
by qualified personnel using safe site work practices. Personal Protective Equipment
(PPE) must be used per safe site work practices.
•
Ensure proper use of fall protection when working at heights, per safe site work
practices. Use appropriate safety equipment and practices to prevent the dropping of
tools or equipment during installation.
•
Under normal operation, compressed supply gas is vented from the SVI II AP to the
surrounding area, and may require additional precautions or specialized installations.
Intrinsically Safe Installation
Products certified as explosion proof or flame proof equipment or for use in intrinsically
safe installations
MUST BE
:
•
Installed, put into service, used and maintained in compliance with national and local
regulations and in accordance with the recommendations contained in the relevant
standards concerning those environments.
•
Used only in situations that comply with the certification conditions shown in this
document and after verification of their compatibility with the zone of intended use and
the permitted maximum ambient temperature.
•
Installed, put into service and maintained by qualified and competent professionals who
have undergone suitable training for instrumentation used in such areas.
