© 2021 Baker Hughes Company. All rights reserved. Masoneilan SVi1000 Positioner Quick Start Guide | 11
Installation and Set Up
Introduction
The SVi1000 Quick Start Guide is intended to help an experienced field technician efficiently
install and setup an SVi1000. If you experience problems that are not documented in this
guide, refer to the SVi1000 Instruction Manual, call your local representative, go to valves.
bakerhughes.com, or contact our helpdesk at (+1) 888-784-5463. Sales offices are listed on the
last page of this document.
This section gives an introduction to the positioner and its components.
Figure 1 shows the standard interface board.
Figure 1 - SVi1000 Operator Controls - Standard
8
7
4
5
6
1
2
3
1
Auto Find Stops Button and LED 1
5
Cancel / Status Button and LED 4
2
Upper Stop Button and LED 2
6
Ground
3
Auto Tune Button and LED 3
7
Configuration Selection Switch
4
4-20 mA Input Signal
8
Open Stop Adjustment Screw
