46 |
© 2021 Baker Hughes Company. All rights reserved.
ValVue Software and the SVi1000
ValVue Overview
This section generally discusses the ValVue software that can be used to configure the SVi1000
from a HART
®
configured laptop.
NOTE
A cloning feature is available for the SVi1000 positioner.
Cloning transfers the configuration and calibration
parameters from one device to another. Cloning
operations are to be performed only by Baker Hughes
personnel or qualified channel partners trained on properly
performing the cloning function. This feature is not
available during normal ValVue operation. Contact Baker
Hughes or your local channel partner for more information.
ValVue and SVi1000 DTM Trial Version
You must download the ValVue software and the SVi1000 DTM software, then install to
configure and use the SVi100. See
ValVue and SVi1000 DTM Software Installation
on
page 46.
The SVi1000 DTM software and the ValVue software comes with a trial version of ValVue. For
60 days after the initial installation, The ValVue software provides the FDT frame capability in
which the SVi1000 DTM software operates. The SVi1000 DTM software provides the capability
of configuring, calibrating, diagnosing, trending and much more. After the 60 day trial period
ValVue must be registered for continued use.
ValVue and SVi1000 DTM Software Installation
This section discusses the ValVue software used to configure the SVi1000 from a HART
®
configured laptop. Minimum requirements are:
o
Windows
®
7, Windows
®
Server 2003 SP3, Windows
®
Server 2008 SP2, Windows
®
8,
Windows
®
Server 2012
o
64 MB RAM
o
Hard drive available space 1 G
o
Available Serial or USB port (or Bluetooth)
o
A HART
®
modem and appropriate cables
