INSTALLATION
PERIPHERALS
WBPEEUI220754A0
3 - 23
Insert a 50-pin SCSI terminator into the SCSI peripheral con-
nector of the power entry panel when it is not used. Remove
the terminator in the power entry panel to connect peripheral
hardware.
NOTES:
1.
A SCSI terminator must always be connected to the last device
on the external SCSI bus.
2.
Address settings and procedures for all non-Elsag Bailey exter-
nal hardware are located in the manufacturer’s instructions. The
SCSI address for the hard drive and floppy drive are factory set. The
address setting for the IIMCP02 Multibus Communication Processor
is located in Table
. All SCSI switches and/or jumpers must be
properly set.
Printers
Printers can be connected to either a terminal server (IIPRS02)
for the OIS consoles or the printer port (Port 1) on the auxiliary
OIC CPU. Shared printers and screen copy printers must con-
nect to a terminal server.
The terminal server has DB-25 style connectors. A null modem
cable connects the printer to any of the terminal server ports
for the IIPRT02, IIPRT03, IIPRT05 and IIPRT09
_
printers.
The
DEFINEDEVICES
command sequence must be completed
for the software to recognize a printer. Refer to the
File Utili-
ties
instruction (Table
). Table
lists the printer cable
part numbers and cable lengths. Table
used by the serial interface.
Table 3-6. Printer Cable Description
Part Number
Length
1947422
_
21001
0.3 m (1 ft)
1947422
_
21010
3.1 m (10 ft)
1947422
_
21025
7.6 m (25 ft)
1947422
_
21050
15.2 m (50 ft)
Table 3-7. Printers
Nomenclature
Description
IIPRT02
Genicom 3410 XLS black and white printer
IIPRT03
Genicom 3410 XCQ color printer (up to 64 colors)
IIPRT04
Gammadata video copier (color)
IIPRT05
Genicom 4440 high speed black and white printer
IIPRT08B
_
Hewlett Packard 660C screen copy printer (color/
black and white)
IIPRT09
_
Okidata 395C 24-pin color printer
IIPRT10
_
Hewlett Packard XL300 screen copy printer (color)
