COMPONENT DESCRIPTION AND REPLACEMENT
CPU REMOVAL
WBPEEUI220754A0
6 - 27
6. Protect the screen of the monitor and set the screen down
on the protective surface.
7. Remove the monitor from the mounting tray by removing
the four screws under the tray.
CPU REMOVAL
This section contains information and the removal instructions
for the CPU inside the OIS console. Read the instructions
before beginning. Refer to the manufacturer’s documentation
for maintenance instructions.
IIOIS42 Console and Driver Cabinet
The CPU for the console is mounted horizontally in the console.
The CPU for the driver cabinet is mounted vertically. To remove
the CPU, follow these steps. Refer to Table
for part num-
bers. Refer to Figure
for the console. Refer to Figure
for the driver cabinet.
1. Turn off the main circuit breaker on the power entry panel.
Check the power indicator to see if power is removed.
2. Remove and label all cables from the CPU.
Figure 6-18. CPU Removal for Consoles
REAR VIEW
CPU MOUNTING
SCREWS
CPU
POWER ENTRY
PANEL
TP80618A
FRONT VIEW
