Baileigh JP-1250, Operator'S Manual

Page: 31 / 64

28
28
Width Adjustment
Loosen the clamping levers (G). 1.
Slide the across the table to the desired position. 2.
Tighten the lock lever. 3.
Planer Table Height Adjustment
The cutting depth is adjusted by means of the planer table. The depth is a measurement of the
intended thickness of the material after it has been processed through the planer.
IMPORTANT : The maximum depth of cut on a single pass is 1/8
” (3.1mm). Setting
the table to take a larger cut will damage the machine and the work piece.
Measure the thickness of the workpiece. 1.
Calculate the depth of cut needed to achieve 2.
the desired finished dimension. (Current
material thickness minus the finished
thickness.
DO NOT exceed 1/8
” (3.1mm) on a
single pass.)
Loosen the height adjustment lock knob (A) 3.
and turn the hand wheel (B) the desired
dimension is indicated on the scale (C).
Lock the height adjustment knob to hold the 4.
position.
G
B
A
C