Baileigh DP-1250VS-HS, Operator'S Manual

Page: 18 / 52

15
A Motor Provides power to the chuck
B 2-Speed Hi-Lo
Changes spindle speed RPM. DO NOT change spindle
RPM until the spindle has stopped completely
C Electrical Enclosure Houses the electrical components
D Control Panel Houses the operators controls
E Down-Feed Handle Changes down-feed from Auto to Manual
F Column Supports the table and head
G Gear Rack Engages the table for height adjustment
H Handle Table height adjustment at two locations
I Coolant Pump Pumps coolant up to the chuck
J Base Support for drill press and coolant reservoir
K Work Table Lock Secures table when pivoting on column
L Work Table Adjustable table with T-slots
M Chuck (Not Included) Holds various tooling for drilling and tapping
N Safety Guard Adjustable guard with limit switch shut-off
O Work Light Provides adequate lighting for work area
P Depth Scale Lock Locks the position of the depth scale
Q Coolant Shut-Off Valve Controls volume of coolant
R Depth Scale Use for setting the depth in manual mode
S Main Power Disconnect Turns main power ON-OFF to the drill press
T Oil Level Gauge Shows current level of gear oil
S
X
T
U
V
W