Baileigh DP-1250VS-HS, Operator'S Manual

Page: 12 / 52

9
TECHNICAL SPECIFICATIONS
Table Size 22" x 18.5" (560 x 470mm)
Quill Diameter 2.95" (75mm)
Spindle Nose to Table 36.41" (925mm)
Spindle Nose to Base 48.22" (1225mm)
Spindle Speed High 375 – 4000 rpm
Spindle Speed Low 100 – 1070 rpm
Spindle Taper MT3 / MT4 optional
Table Slot .625" (15.8mm)
Tapping Capacity 3/4" (19mm)
Swing 20.8" (530mm)
Drill Capacity 1.25" (32mm)
Spindle Travel 5.9" (150mm)
Column Diameter 4.52" (115mm)
Base Dimensions L x W 27" x 19" (686 x 483mm)
Power 220V, 60hz, 1ph
Main Motor 2hp (1.5kw)
Shipping Weight 847lbs (385kg)
Shipping Dimensions 40" x 25" x 83" (1016 x 635 x 2108mm)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileighindustrial.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos illustrations used in this manual are representative only and may
not depict the actual color, labeling or accessories and may be intended to illustrate technique
only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.