background image

 

 

WARRANTY 

9.1 

The Company warrants that (subject to the other provisions of these Conditions) upon delivery, and for a period of 12 months from 
the date of delivery, the Goods will be of satisfactory quality within the meaning of the Sale of Goods Act 1994. Warranty provisions 
are strictly at the determinat

ion of the Company on a case by case basis. The Company’s determinations regarding a warranty claim 

are final. 

9.2 

The Company shall not be liable for a breach of the warranty in Condition 9.1 unless: 

9.2.1 

the Buyer gives written notice of the defect to the Company, and (if the defect is as a result of damage in transit) to the carrier, 
within a reasonable amount of time when the Buyer discovers or ought to have discovered the defect; and 

9.2.2 

the Company is given a reasonable opportunity after receiving the notice to examine such Goods and the Buyer (if asked to 
do so by the Company) returns such Goods to the Company's place of business at the Buyer's expense for the examination 
to take place there. 

9.3 

The Company shall not be liable for a breach of the warranty in Condition 9.1 if: 

9.3.1 

the Buyer makes any further use of such Goods after giving such notice; or 

9.3.2 

the defect arises because the Buyer failed to follow the Company’s oral or written instructions as to the storage, installation, 
commissioning, use or maintenance of the Goods; or 

9.3.3 

the defect arises as a result of ordinary wear and tear; or 

9.3.4 

the Buyer alters or repairs such Goods without the written consent of the Company. 

9.4 

The following are expressly excluded from the warranty in Condition 9.1: 

9.4.1 

die sets, tooling and saw blades; and 

9.4.2 

machine maintenance, adjustment and set ups. 

9.5 

Subject to Conditions 9.2 and 9.3, if any of the Goods do not conform with the warranty in Condition 9.1 the Company shall at its 
option repair or replace such Goods (or the defective part) or refund the price of such Goods at the pro rata Contract rate provided 
that,  if  the  Company  so  requests,  the  Buyer  shall,  at  the  Buyer's  expense,  return  the  Goods  or  the  part  of  such  Goods  which  is 
defective to the Company. 

9.6 

If the Company complies with Condition 9.4 it shall have no further liability for a breach of the warranty in Condition 9.1 in respect of 
such Goods. 

9.7 

Any Goods which have been replaced will belong to the Company and any repaired or replacement Goods will be guaranteed on 
these terms for the unexpired portion of the 12 month period. 

9.8 

All work carried out under the warranty contained in Condition 9.1 must be approved by the Company. 

9.9 

All  electrical  components  and  gearboxes  carry  a  one-year  replacement  warranty  from  the  manufacturer.  This  warranty  does  not 
include labour or shipping costs. 

10 

RETURNS 

10.1  The Buyer shall not be entitled to cancel any order or Contract or return any goods without the prior written approval of the Company. 
10.2  Special orders cannot be cancelled under any circumstances. 
10.3  If the Company agrees to accept the return of any Goods it shall be on terms that 

a) 

They are returned at the Buyer’s expense to the Company within 30 days of delivery 

b)  Th

ey are received by the Company in “as new” condition without any damage or use 

c) 

Any refund will be subject to a 15% “restocking charge” 

and such other terms as the Company may impose. 

11 

LIMITATION OF LIABILITY 

11.1  Subject to Condition 9, the following provisions of this Condition 10 set out the entire financial liability of the Company (including any 

liability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of: 

11.1.1 

any breach of these Conditions; and 

11.1.2 

any representation, statement or tortious act or omission including negligence arising under or in connection with the Contract. 

11.2  All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the Sale 

of Goods Act 1979) are, to the fullest extent permitted by law, excluded from the Contract. 

11.3  Nothing in these Conditions excludes or limits the liability of the Company for death or personal injury caused by the Compan

y’s 

negligence or for fraudulent misrepresentation. 

(THE BUYER’S ATTENTION IS DRAWN TO THE PROVISIONS OF CONDITION 11.4 BELOW) 

11.4  Subject to Conditions 11.2 and 11.3: 

11.4.1 

the Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation or otherwise, 
arising in connection with the performance or contemplated performance of this Contract shall be limited to the invoiced amount 
per each and every individual transaction; and 

11.4.2 

the Company shall not be liable to the Buyer for any indirect or consequential loss or damage (whether for loss of profit, loss 
of business, depletion of goodwill or otherwise), costs, expenses or other claims for consequential compensation whatsoever 
(howsoever caused) which arise out of or in connection with the Contract. 

12 

INTELLECTUAL PROPERTY 

12.1  The property and any copyright or other intellectual property rights in: 

12.1.1 

any Buyer Materials shall belong to the Buyer; 

12.1.2 

any  Company  Materials  shall,  unless  otherwise  agreed  in  writing  between  the  Buyer  and  the  Company,  belong  to  the 
Company,  subject  only  to  a  license  in  favor  of  the  Buyer  to  use  the  Company  Materials  for  the  purposes  of  receiving  the 
Goods. 

 
 
 
 

Summary of Contents for SBR-5220





















































Reviews: