Baileigh Industrial SBR-5220, Operator'S Manual

Page: 15 / 52

12
12
TECHNICAL SPECIFICATIONS
Bed Width
52” (1321mm)
Shear Capacity 20ga. (.912mm) mild steel*
Bending Capacity 20ga. (.912mm) mild steel*
Rolling Capacity 20ga. (.912mm) mild steel*
Maximum Bend Angle 90°
Slip Roll Solid Rod Sizes
.187” (4.76mm) diameter,
.250” (6.35mm) diameter,
.312” (7.92mm) diameter
Minimum Roll Diameter
1.70” (43.2mm)
Box Depth
4” (101.6mm)
Frame and Base Cast Iron
Brake Ground Steel w/Hardened Edge
Shear Table Precision Ground Cast Iron
Shear Blades Hardened Steel (Can be turned four times)
Shear Hold-Down Clamp Spring-Loaded Cast Iron
Diameter of Rolls
1.70” (43.2mm)
Power Requirements Manual
Shipping Dimensions (L x W x H)
67” x 23” x 30” (1702 x 584 x 762mm)
Shipping Weight 830 lbs. (376 kg)
Based on a material tensile strength of *60000 PSI
– mild steel
TECHNICAL SUPPORT
Our technical support department can be reached at sales@baileigh.com.au listing support and
the model number in the subject line. Tech Support handles questions on machine setup,
schematics, warranty issues, and individual parts needs: (other than die sets and blades).
List the model number, serial number and contact name and phone number as well as a brief
description of the nature of the contact in the body of the message.
For specific application needs or future machine purchases contact the Sales Department at:
phone: 61.383.743.888 or email: sales@baileigh.com.au.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.