31
31
•
Press [G], the system will start cutting from the point, which is after moving, and after returning
to the position before the torch moves, it will process according to the normal path.
•
Press [X], regarding the position after moving as the position before moving, and then process.
•
Press [Y], move from the position after moving to the position before moving, then wait for the
next operation.
FILE OPERATION
The system supports cutting code which has txt and CNC postfix. And the maximum capacity is
1M, the largest number of rows is 10000 lines. You can edit, compile, delete, export internal
document, also you can import the file in the U disk into the system.
In the main interface, press the [F2} key (code) to enter local machine code interface.
Files in the Hard Disk
In the file manage interface, press [F1] to enter the hardware file list. The system only lists the
folder, TXT file and CNC file.
•
Press [F4], if the current position of the cursor is txt file or CNC file, you could edit them.
•
Press [F5], if the current position of the cursor is txt file or CNC file, you could delete them.
•
Press [F6], if the current position of the cursor is txt file or CNC file, you could copy the current
file to the flash disk when it is connected to the USB interface.
•
Press [F7], if the current position of the cursor is txt file or CNC file, you could preview the
current graphic.
•
Press [F8], if the current position of the cursor is txt file or CNC file, you could import the current
file to the system, after importing, the system will return to the main interface.
Files in the U Disk
In the code interface, press the [F2] key to go for U Disk interface.
In the U Disk interface, choose the corresponding cutting code, press [F6], the system will save
this code into the internal documents.
Note:
When you open a file from a USB drive, you must save it as a local machine
file before you start cutting. When you save said file from the USB, the file name automatically
transfers
:
When inputting the file name, if you do not want to change the file name, you can directly press
[Enter] to preserve; or modify the file name and then press [Enter] to save. If the same named file
has already exited, the system prompts: If you want to replace the internal documents, press the
[Enter] key, if you want to change the file name, press [Esc], change the file name and then save.
