11
11
SYSTEM BOARD AND MAIN INTERFACE
Operating Board Introduction
[F1]
– [F10]: Function key in different interfaces.
[S
↑/PgUP]: Page-up key of code interface or Torch up in other interfaces.
[S
↓/PgDn]: Page-down key of code interface or Torch down in other interfaces.
[F+/HOME]: Accelerate or skip to the head of the code line.
[F-/END]: Decelerate or skip to the tail of the code line.
[1]
– [9]: During the cutting process, change the cutting speed to the ratio of the speed limit you
have set, for example press [1], change the cutting speed to 10% of the speed limit you have set,
press [2], change the cutting speed to 20% of the speed limit you have set.
