8
8
Technical Support Contact
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
[email protected], Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate technique
only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
Cleaning
The controller is exposed to a lot of dust and grit as with a plasma table, keep it covered when
not being used. Use light to moderate pressure compressed air to blow the dust off the controller.
To clean the controller screen without damaging it, use a clean, soft microfiber cloth and gently
wipe the screen. Most of the dirt will come off this way. If there are still a few stubborn spots,
dampen the cloth slightly with plain water or a very weak solution of distilled vinegar and water.
Wring the cloth tightly, and gently wipe the screen again. This should take care of any remaining
spots. Gently dry the screen with another microfiber cloth.
The molded plastic frame and touch pad buttons can be wiped gently using a slightly dampened
cloth of plain water or a very weak solution of distilled vinegar and water. Be careful not to get any
liquid into the USB port or onto the rocker switch.
Avoid touching the screen. Pressing on the LCD screen can damage the screen with scratches
and possibly breaking the screen. Also, do not stick things to the screen like sticky notes, etc.,
this will block the view of the screen for the operator to monitor the operation.
WARNING:
DO NOT USE gasoline or other petroleum products to clean
the machine. They have low flash points and can explode or cause fire.
