19
19
During the return process, the
[F10] “Stop” button can be pressed if needed to stop the operation.
When the reason for the stoppage is cleared, press the [F3] key to restart the return to refence
operation.
Perforation Point Selection
Before you start cutting or when cutting is paused, the
function key prompt [F8] will display "select new pierce".
When the [F8] key is pressed, the system will prompt
the question of where to pierce.
If the ESC button is pressed, the system will then return
the cutting interface, cancelling the pierce request.
If the ENTER button is pressed, the system will display
the prompt to input the pierce point number.
The pierce point can be input manually at this time.
Pressing the ESC button will exit without manual input
perforation point. Then pressing the left and right arrow
keys to select the perforation point.
Dynamic Amplification
After the start of cutting, the [F8] in the cutting interface will become "dynamic amplification"
(screen zoom in). Then pressing the [F8] key will zoom in on the processing graphic, and
dynamically tracking.
•
Press the [F8] key continuously, the system will progressively amplify graphic.
•
Press ESC to exit the amplified display, back to the cutting interface.
Cutting Exit
When the cutting operation does not get finished, and
the cutting machine also being in the pause condition, if
pressing [ESC], the system will query whether quit the
cutting operation.
If pressing [ENTER], the system will exit the cutting
operation.
If pressing [ESC], the system will not exit, the system
will continue the cutting operation from the current
location.
