![Badger Meter Dynasonics DXN User Manual Download Page 74](http://html.mh-extra.com/html/badger-meter/dynasonics-dxn/dynasonics-dxn_user-manual_466112074.webp)
SYSTEM GROUP
Meter
Adv
Cal
Setup
Main
Log
I/O
System
Comm
Update
Storage
ENet
PC
Disk
Time
Power
Misc
Figure 95: System group
Misc (Miscellaneous) Page
Figure 96: System miscellaneous
Language
Use the
Language
pull-down list to select the language for screen displays .
English
Deutsch
Français
Español
Japanese
Pyccкий
Português
Italiano
Netherlands
Svenska
Norsk
Table 20: Language selections
Entry Units
Entry Units
are the units of measurement for configuring meters .
Select
English
for inches or
Metric
for millimeters .
OTEE:
N
The
Entry Units
are independent of the choices made to display flow rate, total, energy readings and similar units . For
example, the meter can be configured for a 2” ANSI pipe and still have the rate displayed in liters per minute (lpm) .
The
English/Metric
selection also configures the DXN flow meter to display sound speeds in pipe materials and liquids as either
feet per second (fps) or meters per second (mps), respectively .
MPORTTNT
I
If the Entry Units choice has been changed from English to Metric or from Metric to English, the entry must be saved by doing a
power down and then a power up in order for the DXN flow meter to initiate the change in operating units. Failure to save and reset
the flow meter results in improper transducer-spacing calculations and an instrument that may not measure properly.
System Group
Page 74
November 2016
HYB-UM-00090-EN-04