![background image](http://html1.mh-extra.com/html/backyard-products/gambrel/gambrel_assembly-manual_3349556031.webp)
29
3/4"
(1,9 cm)
Gauge
Block
Fig. B
1
BEGIN
3
2
Install (1)
11-7/8" x 48"
roof panel flush with the chalk line, flush to the
outer edge of back rafter and
flush to the installed panel
(Fig. D)
.
Secure panel with (2) 2" nails in the corners.
Chalk Line
Install (1)
23-7/8" x 96"
panel flush along the chalk line
(Fig A)
.
Panel should be flush to the outside edge of the front rafter
(Fig. C)
.
On the 5th rafter use the 3/4" gauge block
GAA
to center the panel over the rafter
(Fig. B)
.
Secure panel with (2) 2" nails in the corners as shown.
Measure down from corner of front and back rafters to 23-7/8"
(Fig A)
. Snap a chalk line across rafters.
ROOF PANELS
Roof panels may cause serious injury until securely fastened.
PARTS REQUIRED:
2" (5,1 cm)
x4
Two Nails
Flush
23-7/8" x 96"
23-7/8" x 48"
Two Nails
23-7/8"
(60,6 cm)
23-7/8"
(60,6 cm)
Fig. A
Flush
Panel 3/8"
(1 cm)
Rafter
Edge
Fig. C
3/4" GAUGE
BLOCK
GAA
Install roof panels with the rough side facing up (painted grid lines).
Flush
7/16 x 23-7/8 x 96"
(1,1 x 30,2 x 243,8 cm)
x1
7/16 x 23-7/8 x 48"
(1,1 x 30,2 x 121,9 cm)
x1
Panel 3/8"
(1 cm)
Rafter
Edge
Fig. D
NOTE:
To help locate panel
flush to chalk line,
install (2) partly driven
nails in two rafters,
on the chalk line.