![background image](http://html1.mh-extra.com/html/backyard-products/gambrel/gambrel_assembly-manual_3349556029.webp)
27
2
Mark top plates to measurements shown. Place
two-gusset
rafters over studs and flush to the inside of front and
back wall panels
(Fig. A, Fig. B)
.
Secure rafters with (2) 3" screws at rafter end.
Place
one-gusset
rafters flush to the inside of front and back wall panels and flush to side wall panels
(Fig. B)
.
Secure with (1) 3" screw at truss end
(Fig. A, Fig B)
.
Repeat steps for the opposite side of shed.
You have finished installing your rafters.
Fig. A
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
RAFTERS
PARTS REQUIRED:
3" (7,6 cm)
x24
1
BEGIN
FINISH
x2
TRUSS ASSEMBLY
WITH 1 GUSSET
x5
TRUSS ASSEMBLY
WITH 2 GUSSETS
Measure to
outside of
rafter.
Measure to
outside of
rafter.
BACK OF
SHED
ONLY 1 SCREW
HERE
ONLY 1 SCREW
HERE
Align over studs.
3" (7,6 cm
Screws
angled to
hit top plate
Install trusses
flush with
outside of
panel.
Fig. B