Bacharach H25-IR PRO, User Manual

Page: 81 / 128

H25-IR PRO Instruction Manual Operation
P/N: 3015-5678 Rev 6 71
Step Button Description Sample Screen(s)
4
Press the Up Arrow and Down
Arrow buttons to scroll
through the Serial Output Type
options.
5 Press the ENT button to select
that output type.
5.6.8. Probe Button (Optional)
The H25-IR PRO supports three types of probes:
•
Standard Probe with Flex Tubing
•
Standard Probe with LED and Push Button
•
Smart Probe.
The Smart Probe contains buttons that function the same as the buttons on the front panel. The standard probe (with LED
and push button) contains a single programmable button. The Probe Button option defines the function of that single button.
NOTE: The buttons on the instrument’s front panel and the Smart Probe are mapped the same and can be
used inter-changeably.
NOTE: The function of the probe button can be set through the Probe Button setting of the Advanced Setup
menu. The Probe Button setting (see Figure 5-10 above) is only present (at the bottom of the Advanced
Setup menu) if a Smart Probe is not automatically detected. See Figure 5-13 below.
Table 5-29. Assign Probe Button Options
Options Function of Button on Standard Probe
DISABLED Button is disabled
MODE KEY Button toggles mode function between Search and Measurement modes
ENTER KEY Button has the same function as the ENTER (
¿
) key on the front panel
SERIAL OUTPUT TYPE
p
---
NONE
q TEXT PACKET
± SELECT ESC=QUIT
SERIAL OUTPUT TYPE
p NONE
TEXT PACKET
q
TEXT ONLY
± SELECT ESC=QUIT