Instruction 0024-9395
3
Fyrite Pro
2.0 TECHNICAL CHARACTERISTICS
The Analyzer Directly Measures and Displays:
• Ambient Temperature ............................32 to 212 °F (0 to 100 °C)
• Flue Gas O
2
content ................................0.0 to 20.9% O
2
• Flue Gas Temperature ...........................0 to 999 °F (–18 to 537 °C)
• Flue Gas CO content ..............................0 to 2,000 ppm CO
• Draft ........................................................–9.99 to 27 inWC
(–9.99 to 67 mb/HPa)
The Analyzer Computes and Displays:
(when the measured oxygen level is below 17.9%)
• Combustion Efficiency ............................0.1 to 99.9%
• Flue Gas CO
2
content .............................0.1 to a fuel dependent
maximum value in %
• Flue Gas CO Air-Free content ...............0 to 9,999 ppm
• Excess Air ...............................................0 to 400%
Fuel Selection:
(F1 thru F4 denotes the fuel selected as displayed on the LCD)
• Natural Gas (F1)
• Oil #2 (F2)
• LPG (F3)
• Kerosene (F4)
Normal Operating Conditions:
Temperature:
• Analyzer .................................................32 to 104 °F (0 to 40 °C)
• Probe .......................................................1,000 °F max (538 °C) at
5" insertion
Humidity .......................................................15 to 90% RH,
Non-Condensing
Power Requirements ....................................Four disposable ‘AA’ Alkaline
batteries (an optional AC adapt-
er is available that eliminates
the need for batteries)
Operating Time
................................. Up to 18 hours con tin u ous (pump
run ning and backlight off)
Warm Up Time
................................... 10 or 60 seconds, dependent on
analyzer’s model and setup (Refer
to Section 4.13.1)
