Instruction 0024-9395
25
Fyrite Pro
2. Press the
▼
button
once
to display the Save Screen. The number
shown in this screen represents the memory location (1 thru 10) to
which the current test data will be saved.
3. Press
ENTER
to save the test data and return to the Hold Mode, or
press
HOLD
to return to the Hold Mode without saving.
4.7 Opening and Viewing Saved Test Data
(Model 105/110/120/125)
Perform the following to open and view saved test data:
Note:
If no test data has been saved, the option to open the
memory for viewing will not be available.
1. If the analyzer is in its Run Mode, press the
HOLD
button
twice
to
enter the Print/Memory Menu Screens. If the analyzer is already in
its Hold Mode, press the
HOLD
button only
once
. The first menu item
displayed is the Print Screen.
2. Press the
▲
or
▼
button until the Open Screen is displayed, and
then press
ENTER
to open the memory locations for viewing. The
number shown in the second screen represents the most recent
memory location where data was stored.
3. Press the
▲
or
▼
button to scroll to the desired memory location,
and then press
ENTER
to recall the stored data and return to the
Hold Mode. While in the Hold Mode, the recalled data can be viewed
using the
▲
and
▼
buttons, or printed per Section 4.9.
