Instruction 0024-9395
14
Fyrite Pro
3.5.5 Time Setup
There are two Time Setup Screens, one for hours and the other for min-
utes. Two bars appear above the segments being changed. The clock is in
a 24 hour format, but will appear as AM/PM on the printout.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press
ENTER
until the first Time Setup Screen is displayed—the
one with two bars over the hour digits.
2. Press the
▲
or
▼
button until the correct hour value is displayed.
3. Press
ENTER
to move the selection bars over the minute digits.
4. Press the
▲
or
▼
button until the correct minute value is displayed.
5. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
3.5.6 Date Setup
There are two Date Setup Screens, each labeled “DAtE”. The first screen
sets the month while the second sets the day.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press
ENTER
until the first Date Setup Screen is displayed.
2. Press the
▲
or
▼
button until the correct month is displayed.
3. Press
ENTER
to change the ‘Day’ value.
4. Press the
▲
or
▼
key until the correct day is displayed.
5. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
