Instruction 0024-9395
29
Fyrite Pro
Figure 4-2A. Model 100 Run Mode Screen
9
CO
PPM
CO
4.11 Resetting the Microprocessor
If the analyzer ‘locks up’ and cannot be turned OFF, reset the microproces-
sor by removing one of the batteries for 5 seconds.
4.12 Run Mode Screens
Figures 4-2A thru 4-2E show the order in which the screens are displayed
by pressing the
ENTER
and
▲▼
buttons after the analyzer warms-up and
enters its Run Mode.
The top screen in each figure is the one that appears immediately after the
analyzer completes its warm-up cycle.
Refer to Section 4.13 for a detailed description of each screen.
Figure 4-2B. Model 105 Run Mode Screens
CO &
Draft
Draft Zero
WC
WC
ppm
CO
