CHAPTER 6 –
Maintenance
Chap. 6
-
31
/
32 -
6.11 Dismantling
The machine may have to be moved to different premises during its life cycle. In this case proceed as
follows.
Follow the steps listed below:
STEP
OPERATION
1
Shut down the machine and disconnect it from power supply.
2
Remove and put back all tools located in the machine.
3
Clean the machine and protect the corrosion-prone products using special products.
4
To transport and install the machine in the new premises, use the means and methods
described in this manual.
Once the machine has reached the end of its technical life, it must be shut down and must not be used
again for the purposes for which it was originally designed and manufactured; however, you must make
sure the parts and raw materials it is made up can be re-used. Said re-use must not be performed
according to modalities and functions that differ from those for which individual machine parts and the
machine as a whole were designed and manufactured.
PAOLINO BACCI S.r.l. declines any responsibility arising from damage incurred by persons or objects
due to the re-use of individual machine parts for functions or assembly different from the original
functions or assembly. PAOLINO BACCI S.r.l. shall not implicitly or explicitly acknowledge the suitability
of machine parts that were reused after the final de-activation of the machine for dismantling purposes.
Electronic parts
Electronic cards, batteries, storage batteries and buffer batteries of the electrical
switchboard are considered to be hazardous and toxic waste. These parts must be
disposed of by special authorized companies according to directive: 2002/96/EC.
Oil
The oil used during the work cycle of the machine and/or its maintenance must be disposed of according
to the EEC European Directive 75/439 of 16 July 1975.
In accordance to this directive all companies that dispose of used oil are obliged to provide the
competent authorities with information pertaining to the elimination and disposal of used oil and oil
residues.
Please note that according to Presidential Decree (DPR) N° 691 of 23 August 1982, it is obligatory to
address the CONSORTIUM OF USED OIL.
Summary of Contents for Twin
