Bacci Twin, Use And Maintenance Instruction Manual, Page: 125 / 202

CHAPTER 5 – Controls and use
Chap. 5
- 7
/48 -
CONTROLS ON THE MAIN PUSHBUTTON PANEL
POS. CONTROL DESCRIPTION
5
Key “Automatic / Manual“
operating mode selector
switch
Use the key selector switch to select either manual or automatic
operating mode.
The 2 operating modes differ in terms of degree of operating
safety. Manual operating mode is not as safe as automatic
operating mode. Only the machine operator may use this selector
switch.
Remove and store the key in a safe place to prevent use by
unauthorized personnel.
Select the “HOLD TO RUN” mode only for tasks that must be
carried out on board the machine, such as, for example,
equipping the machine, machining trial runs and maintenance,
etc.
Select “Automatic” mode to carry out normal piece machining.
.
6
“Return from over-stroke”
pushbutton.
When an axis has gone into over-stroke, this pushbutton returns
the axis to the work range.
Only the machine operator may use this pushbutton.
7 Stop work pushbutton
Press this button to stop the axes and spindles. It does not turn
off the machine.
Restart the cycle by pressing the automatic Start Cycle button.
8
“Turn on auxiliaries”
control pushbutton
Use this control to turn on the auxiliaries. Power supplies
(compressed air and electricity) must be present.
8
8
7
5 6