BABYSTYLE Qyster 3, Instruction Manual

Page: 20 / 28

20
40
FITTING THE CARRYCOT RAIN COVER
40. Fully extend the hood. Unfold and place the
rain cover over the hood of the carrycot so that
the flap on the rain cover corresponds with the
opening in the in the carrycot hood. Pull the rain
cover down at the rear of the hood so that the
elasticated edge covers the rear of the carrycot.
Ease the front part of the rain cover over the apron
and down around the front and sides of carrycot.
Fasten press studs below attachment device.
42
ALIGN
AND
PUSH
DOWN
FITTING THE OYSTER CARAPACE
INFANT CAR SEAT USING THE MULTI
ADAPTORS
42. The car seat can not be attached to the chassis
until the seat unit or carrycot has been removed.
The multi adaptors fit many leading brands of car
seats (check with your retailer for full details). Insert
the car seat adaptors into the chassis attachment
devices. The adaptors and chassis attachment
devices are marked with an ‘L’ and ‘R’ to represent
left and right from the perspective of you being in
the pushing position.
41
FITTING THE FOOTMUFF
41. Release the harness clips from the centre
buckle. Fit the footmuff over the head rest
padding and pass through the shoulder straps.
Pass the waist belts through the corresponding
slots in the footmuff. Pass the crotch strap through
the slot in the footmuff. Fold the flap of the top
cover over the bumper bar. The footmuff top cover
can be removed by unfastening the zip. The base
of the footmuff can be used as a seat liner without
the top cover.