11
ADJUSTING THE HANDLE HEIGHT
16.
The handle height is adjustable to four
positions. To adjust the handle height, hold in the
button in the middle of the handle grip, slide the
handle up or down to one of the four positions.
The handle will click into one of the pre-set
positions when the button is released.
USING THE PARKING BRAKE
17.
To engage the brake, firmly press down on the
brake lever found in the middle of the rear axle.
Check that the brake is fully engaged before
letting go of the handle. To release the brake,
press forwards or lift up the brake lever until the
wheel moves freely.
WARNING:
Never leave the stroller without
first engaging the brake.
WARNING:
Always ensure that the parking
brake is applied when placing and removing
children.
FITTING / REMOVING THE BUMPER
BAR
18.
Push both ends of the bumper bar into the
corresponding entry slots on the seat unit until the
bumper bar locks into position. To remove the
bumper bar, press in the bumper bar release
buttons on either side underneath the entry slots
on the seat unit.
17
18
16
SLIDE
PUSH
PRESS
DOWN /
LIFT UP
Summary of Contents for Qyster 3
