BABYSTYLE Qyster 3, Instruction Manual

Page: 6 / 28

6
All references to left and right are given from
the perspective of a person standing in the
pushing position.
FITTING AND REMOVING
OF FRONT WHEELS
Ensure the swivel lock under the support bar
between the front wheels is in the unlock position
(see section 4).
1. Push the wheel unit onto the front wheel axle
stub until it clicks into position.
2. To remove the wheel; push in the quick release
button on the back of the front wheel joint and
pull the wheel away from the axle.
FITTING AND REMOVING
OF REAR WHEELS
3. Press and hold the button in the centre of the
rear wheel and push the wheel into the rear wheel
housing; release the button and the wheel should
lock in position.
To remove; press and hold the button in the centre
of the rear wheel and pull the wheel away from the
wheel housing.
1
2
3
PRESS
AND
HOLD
PUSH
BUTTON
PUSH