background image

10

FOLDING THE CHASSIS WITH THE
SEAT UNIT FITTED (CONT)

13.

Pull the carry handle upwards to fold the

chassis. Squeeze the chassis together if required
so that the chassis locking clip locks into place.
The folded chassis can now free-stand or lie flat.

To fold the chassis with the seat unit forward
facing: Apply the rear brake. Lift the lever on the
seat back. Push the seat-back forward and the
bumper bar and leg rest will automatically collapse
to the front of the stroller. While standing in the
push position, simultaneously pull back the sliders
on each side of the chassis and push the handle
away from you so that it rotates forward all the way
to the front wheels. Locate the carry handle
positioned on the bottom of the seat unit. Pull the
carry handle upwards to fold the chassis. Squeeze
the chassis together if required so that the chassis
locking clip locks into place. The folded chassis
can now free-stand or lie flat.

FOLDING THE CHASSIS WITH THE
SEAT UNIT / CARRYCOT / CAR SEAT
REMOVED 

Apply the brake, while standing in the push
position, simultaneously pull back the sliders on
each side of the chassis; lift and push the handle
away from you and gently lower down towards the
front wheels.

14.

Hold the chassis with hands left and right at

the central attachment device.

15.

Lift and the rear legs will swing in and the

chassis will close and lock.

13

14

15

LIFT

HOLD
AND
LIFT

Summary of Contents for Qyster 3





























Reviews: