BABYSTYLE Qyster 3, Instruction Manual

Page: 23 / 28

23
CARE AND MAINTENANCE
• Regularly check screws, rivets, bolts and fastenings to ensure they are locked tight and
secure. Replace any parts in an inferior condition. When using this product during the
winter, by the sea or off road it is important to clean using fresh water and dry
thoroughly. Salt water and salt and grit from the roads will corrode metal parts unless
removed.
• Check on a regular basis that all chassis locking devices are working correctly.
• If any part of the product is damaged, contact your local BabyStyle retailer immediately
without using the pushchair.
• Do not expose the product to excessive sunlight for periods of time, even normal
exposure to sunlight may cause change to the colour of the fabrics.
• Take care not to tear fabrics when transporting the stroller.
• Light oil or silicone spray can be used to lubricate moving parts. Periodically remove the
rear wheels; clean, lubricate and replace.
• Ensure all zips are either fully open or closed to prevent damage.
• Always use the rain cover in inclement weather.
• Do not place items on top of the hood/canopy, it could damage the fabrics or render
the product unsafe.
• Any load attached to the handle and/or on the back of the backrest and/or on the sides
of the stroller will affect the stability of the stroller.
• Tyres can leave marks on some surfaces such as vinyl flooring or carpet.
• Fabrics should only be cleaned in accordance to the care labels.
• Do not place fabrics in a washing machine, hand wash or sponge clean only using mild
detergent and warm water (30°C)