background image

28

d

Adjust the angle of the operation panel.

Loosen the 2 thumb screws behind the operation 
panel, adjust the operation panel to an easy-to-view 
angle, and then tighten the thumb screws.

1

Thumb screws

Preparing the thread guide 
assembly

Raise the thread guide assembly.

a

Loosen the two thumb screws on top of the 
thread guide assembly support.

1

Turn the screw counterclockwise three or four 
times to loosen it.

b

Grab the grips on the thread guide assembly 
support and push toward the middle.

(Side view)

(Top view)

Note

• Using the disc-shaped screwdriver 

included, loosen and firmly tighten the five 
thumb screws.

 CAUTION

• When setting up the thread guide assembly, set 

it up with the needle bar 6 position selected, 
otherwise the machine may malfunction. 
(Refer to “Moving and threading a selected 
needle bar” on page 62 for moving the needle 
bar.)

Summary of Contents for Valiant BMV10





























































































































































































































































































































Reviews: