264
c
Lower the L-shaped bracket to make it
touch the machine bed and then tighten the
two hexagonal screws using the Allen
screwdriver (medium). Firmly tighten the
screws.
1
L-shaped bracket
d
Using the Allen screwdriver (large), loosen
the four hexagonal screws on the inside of
the ring. Loosen the screws only by about
one turn.
1
Hexagonal screws
2
Allen screwdriver (large)
→
When the screws are loosened, the ring can be
lowered.
e
Insert the pad between the machine bed
and the ring of the cap frame driver.
1
Pad
2
Machine bed
3
Ring of the cap frame driver
f
Lightly press down the ring, and then use
the Allen screwdriver (large) to tighten the
four hexagonal screws on the inside of the
ring.
Firmly tighten the screws.
1
Ring
g
Remove the pad inserted in step
e
.
Note
• Do not loosen them too far.
CAUTION
• Make sure that each hexagonal screw is firmly
tightened. If any screw remains loosen, injuries
may result.