GETTING READY
19
1
Right-side/rear view
1
Touch pen holder
Use the touch pen holder to hold the touch pen when not in
use.
2
SD card slot
Insert an SD card into the SD card slot in order to import/export
embroidery pattern data.
3
USB port for media
In order to send patterns from/to USB media, plug the USB
media directly into the USB port.
4
USB port for computer
In order to import/export patterns between a computer and the
machine, plug the USB cable into the USB port.
5
Handwheel
Rotate the handwheel to move the needle up and down. Be
sure to rotate the handwheel toward the LCD panel
(counterclockwise).
6
Power supply plug
Insert the plug on the power supply cord into the power supply
plug.
7
Main power switch
Use the main power switch to turn the machine ON (I) and OFF
(
{
).
Do not turn the power on soon after turning the power off. It is
recommended that you wait 5 seconds before turning the
power back on.
8
Ventilation slots
Operation panel
1
Start/Stop button
Press the start/stop button to start or stop the machine. The
lighting status and color of the button changes depending on
the operation condition of the machine.
2
Thread trimming button
Press the thread trimming button to trim both the upper and
the bobbin threads.
3
Automatic needle-threading button
Press the automatic needle threading button to thread the
needle.
4
Speaker
5
LCD (touch panel)
Touch the keys that appear on the touch panel to select and
edit patterns and confirm various information.
Bottom
Lit in red
: When the machine cannot start
sewing
Flashing in green
: When the machine can start
sewing
Lit in green
: While the machine is sewing
Flashing in orange
: When the machine can cut the
thread
Off
: When the machine is turned off
