OTHER BASIC PROCEDURES
113
3
Checking if thread spool changes
are necessary
When selecting a pattern, the number of thread
changes can be viewed, however, which thread
colors are used in the pattern cannot be checked
on this screen. Whether or not and when thread
spools will need to be changed can be checked
with the following indicators.
■
Time until the machine stops
embroidering
This indicator shows the amount of time until the
machine stops embroidering. The machine stops
when a spool change is required, or when the
machine is set to be stopped by other settings.
If the spool change indicator is appears, the
machine will require a spool change. When the time
is indicated in red, it is the last color embroidering
before the machine stops.
1
Time until the machine stops
■
Spool change indicator (
)
The spool change indicator in the stitch navigating
screen indicates the number of times that the thread
spools will need to be changed and the amount of
time between changes.
a
Use the scroll bar on the right side of the
thread color sequence display in the
embroidering screen.
→
Each time
is touched, the thread color sequence
display scrolls down to the next color. After
reaching the last color in the thread color sequence
display, the first color is selected.
• The display can also be scrolled by using the scroll
bar.
b
Check the position of
.
1
indicates when the thread spools will
need to be changed. The thread spools will need
to be changed the number of times that this
indicator is displayed and between the two thread
colors at the point where it is displayed.
2
Touch
to scroll up through the thread color
sequence display. Each time this key is touched,
the previous color in the thread color sequence
display is selected. After reaching the first color in
the thread color sequence display, the last color is
selected.
c
After checking the desired information,
touch
or the top of the scroll bar to
return to the first color.
1
1
2
