HHP PDA
At the beginning of each shift
1.
Change the battery
at the beginning of your shift and every 4hours.
2.
Reset
your PDA at the beginning of your shift.
Resetting
(sometimes called a warm boot or a soft reset) will prevent freezes & other problems.
Press the CTRL key and the SFT key on the keypad at the same time.
Hold down the buttons until the screen is blank and the lights at the top are flashing.
To turn on the PDA
:
1. Tap the Power button. Do NOT power off device.
2.
“Waking Up” appears on the screen
for a few seconds.
3. Check to make sure the device
has a full battery. Color bar at the top of the screen
indicates battery status.
4. Tap CareMobile icon.
To scan medications and the ID band,
press Scan.
The scanner emits a green bar that must be on the barcode.
To exit correctly
:
1. Tap Workflow at the bottom of the window.
2. Tap Exit.
3. Return device to charging cradle. Do NOT power off device.
Note: Do not tap the Exit icon to turn off the PDA. It exits out of the charting view and opens the
IS view. If clicked, a password window opens that does not accept your password.
Green bar Indicates
a full battery
Power
button
