![background image](http://html2.mh-extra.com/html/baby-lock/altair-2/altair-2_instruction-and-reference-manual_3052828096.webp)
UTILITY STITCHES
94
f
From the wrong side of the fabric, pull the end of the
bobbin thread to pull the upper thread through to the
wrong side of the fabric. Tie the two thread ends
together and cut the threads.
g
After the button is attached, select another stitch and
rotate the handwheel toward you (counterclockwise)
to raise the feed dogs.
Attaching 4-Hole Buttons
Sew the two holes closest to you. Then raise the presser
foot and move the fabric so that the needle goes into the
next two holes, and sew them in the same way.
Attaching a Shank to the Button
a
Pull the shank lever toward you before sewing.
b
After sewing is finished, pull the two ends of the upper
thread between the button and the fabric, wind them
around the shank, and then tie them firmly together.
c
Tie the ends of the bobbin thread from the beginning
and end of sewing together on the wrong side of the
fabric.
d
Cut off any excess thread.
Eyelet
Use this stitch for making belt holes and other similar
applications.
a
Select a stitch.
b
Use
in either the stitch width display or the
stitch length display to choose the size of the eyelet
(page 61).
c
Attach advanced monogramming foot “N+”, then
rotate the handwheel toward you (counterclockwise)
to check the needle drop point.
d
Lower the presser foot and start sewing.
When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
e
Use the eyelet punch to make a hole in the center of
the stitching.
1
Shank lever
a
Memo
• For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 199.
1
Needle drop point
a
Summary of Contents for Altair 2
