SEWING
SEW
ING B
A
SI
C
S
57
2
i
Touch .
j
Sew trial stitches and confirm that the settings are as
desired.
Pressing down on the main foot controller increases the
sewing speed; releasing the pressure on the main foot
controller decreases the sewing speed.
Release the main foot controller or side pedal to stop
sewing.
Adjusting the Length of the Cord for the Main
Foot Controller
a
Unwind the cord for the main foot controller.
b
Guide the cord between the tabs.
c
Wind the cord until it is the desired length.
*
The cord can be wound either clockwise or
counterclockwise.
d
Pass the cord between the tabs.
Combining Stitch Patterns
Stitch patterns from the following categories can be
combined.
Memo
• The speed that is set using the sewing speed
controller will be the main foot controller’s
maximum sewing speed.
• When the multi-function foot controller is
connected, the “Start/Stop” button cannot be used
to start sewing.
Note
• In order to avoid stepping on the cord with the
main foot controller, pass the cord between the
tabs.
Memo
• When storing the cord, pass it between the tabs,
and then insert the plug into the jack on the main
foot controller.
Summary of Contents for Altair 2
