![background image](http://html2.mh-extra.com/html/baby-lock/altair-2/altair-2_instruction-and-reference-manual_3052828080.webp)
UTILITY STITCHES
78
b
Align the edge of the fabric with the edge of the presser
foot, and start sewing.
*
To sew a 6.5 mm (approx. 1/4 inch) seam
allowance along the right edge of the presser foot
with
(Q-02) selected, the width (which is the
needle position) should be set to 5.50 mm (approx.
7/32 inch).
*
To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the left edge of the presser foot with
selected, the width should be set to 1.50 mm
(approx. 1/16 inch).
*
To change the needle position, use
or
in
the L/R Shift display.
Piecing Using the 1/4 Quilting Foot with Guide
This quilting foot can sew an accurate 1/4 inch or 1/8 inch
seam allowance.
It can be used for piecing together a quilt or for
topstitching.
a
Select
, and then attach the 1/4 Quilting foot with
guide.
b
Use the guide and marks on the presser foot to sew
accurate seam allowances.
Piecing a 1/4 inch seam allowance
Sew keeping the edge of the fabrics against the guide.
Creating an accurate seam allowance
Use the mark on the foot to begin, end, or pivot 1/4 inch
from edge of fabric.
Topstitching quilting, 1/8 inch
Sew with the edge of the fabric aligned with the left side of
the presser foot's front section.
Quilting
Sewing the quilt top, batting, and backing together is
called quilting. You can sew the quilt with the compact
digital dual feed foot to keep the quilt top, batting, and
backing from sliding. The compact digital dual feed foot
has a motorized belt that moves together with the feed
dogs in the needle plate during sewing.
For straight line quilting, use the compact digital dual feed
foot and the straight stitch needle plate. Always select a
straight stitch (middle needle position) when using the
straight stitch needle plate.
1
6.5 mm (approx. 1/4
inch)
1
6.5 mm (approx. 1/4
inch)
Memo
• In the case Q-01(center, at L/R Shift 3.5 mm) is
selected, if the guideline marker is set at 10.0 mm
(3.5 mm plus 6.5 mm, close to 1/4 inch), you can
sew piecing by referring to the guideline marker.
1
Guide
a
a
a
1
Guide
2
1/4 inch
Memo
• For accurate fabric placement, refer to “Aligning
the Fabric with a Mark on the Needle Plate or
Bobbin Cover (with Mark)” on page 72.
1
Align this mark with
edge of fabric to begin.
2
Beginning of stitching
3
End of stitching
4
Opposite edge of fabric
to end or pivot
5
1/4 inch
Memo
• For details on pivoting, refer to “Pivoting” on
page 65.
1
Surface of fabric
2
Seam
3
1/8 inch
a
b
a
e
e
c
d
b
a
b
c
Summary of Contents for Altair 2
