UTILITY STITCHES
98
b
If necessary, change the stitch width and stitch length.
c
Touch .
d
Touch
, select the angle settings for the start and
end of sewing, and then touch
.
1
Select the start or end of sewing.
2
Select an angle.
3
Specify that the angle does not change.
e
Select the method for finishing sewing. For this
example, since the angle at the end of sewing will
begin changing when
(Reverse stitch button) is
pressed, select
.
1
Press
(Reverse stitch button) for the angle at the
end of sewing to start changing; the machine stops
when sewing is finished.
2
The machine stops when the specified number of stitch
patterns have been sewn. The number of patterns that
are specified includes the number of patterns used to
change the angle. (page 99)
f
If necessary, use a chalk pencil to draw a line at the
location to be sewn.
g
Start sewing.
h
After sewing the desired length, press
(Reverse
stitch button).
When
(Reverse stitch button) is pressed, the
angle at the end of sewing begins to change, and the
machine stops when sewing is finished.
i
When finished sewing, set [Tapering] to [OFF], and
then touch
.
2
1
3
Memo
• If you stop sewing at the point where end tapering
should begin (either by pressing the “Start/Stop”
button or by lifting your foot from the foot
controller), press
(Reverse stitch button) and
resume sewing by either pressing the “Start/Stop”
button or pressing on the foot controller. End
tapering will begin as soon as sewing resumes.
2
1
Summary of Contents for Altair 2
