Baby Lock Altair 2, Instruction & Reference Manual

Page: 53 / 212

CHANGING THE PRESSER FOOT
GET
T
ING REA
D
Y
51
1
c
Position the compact digital dual feed foot to the
presser foot bar by aligning the notch of the compact
digital dual feed foot to the large screw.
Side view
d
Hold the compact digital dual feed foot in place with
your right hand, then using the disc-shaped
screwdriver securely tighten the large screw.
e
Plug the connector of the compact digital dual feed
foot into the jack on the back of your machine.
f
Touch to unlock all keys and buttons.

All keys and operation buttons are unlocked, and the
previous screen is displayed.
g
Place the fabric under the compact digital dual feed
foot with the needle at the starting point of the
stitching.
h
Be sure that the feed position lever is pushed down and
the compact digital dual feed foot is ready to sew.
1
Feed position lever

Attaching/Detaching Toe
Attach the toe by aligning the pins with the notches and
snap it into place.
1
Pins
2
Notches
If you push down on the front and back part of the
compact digital dual feed foot, the toe of the compact
digital dual feed foot will snap off.
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.
Note
• Do not operate the lever while sewing.
Memo
• When the feed position lever is up, dual feed
function is not effective. When the feed position
lever is down, the black roller belt on the compact
dual feed is engaged.
a