Babboe Curve Mountain, User Manual

Page: 27 / 81

ENGL
ISH
DE
UTS
CH
FRANÇAI
S
NEDER
LAND
S
12
Bicycles equipped with the PWseries TE drive unit can
use the Automatic mode.
TIP
The automatic mode is a function enabling automatic
change to the optimized assist mode according to the rid-
ing conditions.
• To use the Automatic mode, press the assist mode
switch (up) for 1 second or longer. The Automatic
mode indicator will light up and the mode will be
changed to the Automatic mode.
• To cancel the Automatic mode, press the assist mode
switch (up) for 1 second or longer. The Automatic
mode indicator will go off and the Automatic mode will
be canceled.
TIP
• Even if you press the assist mode switch (up & down)
while in Automatic mode, the assist mode cannot be
changed.
• The Automatic mode is saved when the power is
turned off. When you turn on the power again, the as-
sist mode will be in the Automatic mode.
EXPW
Assist
mode
Assist mode
indicator
HIGH
STD
ECO
+ECO
OFF
Assist
mode
Assist mode
indicator
HIGH
STD
ECO
+ECO
OFF
Assist
mode
Assist mode
indicator
Automatic
mode
1 seconds
or longer
1 seconds
or longer
PW-X drive unit PWseries SE
drive unit
PWseries TE
drive unit
Assist
mode
Assist
mode
Assist
mode
Assist mode
indicator
Assist mode
indicator
Assist mode
indicator
HIGH
EXPW
STD
ECO
+ECO
OFF
HIGH
STD
ECO
+ECO
OFF
Auto-
matic
mode
1 second
or longer
1 second
or longer
2
Speedometer
The speedometer displays your bicycle speed (in kilome-
ter per hour or mile per hour). To select the km/mile, see
“km/mile setting”.
TIP
If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the
speedometer displays “0 km/h or 0 MPH”.
Automatic mode
indicator
Speedometer
X0S7_EPAC欧州向け英語_MY19.indd 12 2018/04/04 9:29:35
• Speedometer
The speedometer displays your bicycle speed (in kilometer per
hour or mile per hour). To select the km/mile, see “km/mile setting”.
TIP
If your bicycle speed is less than 2.0 km/h or 1.2 MPH,
the speedometer displays “0 km/h or 0 MPH”.
• Battery capacity indicator
The battery capacity indicator displays an estimate of how much
capacity is left in the battery.
12
Bicycles equipped with the PWseries TE drive unit can
use the Automatic mode.
TIP
The automatic mode is a function enabling automatic
change to the optimized assist mode according to the rid-
ing conditions.
• To use the Automatic mode, press the assist mode
switch (up) for 1 second or longer. The Automatic
mode indicator will light up and the mode will be
changed to the Automatic mode.
• To cancel the Automatic mode, press the assist mode
switch (up) for 1 second or longer. The Automatic
mode indicator will go off and the Automatic mode will
be canceled.
TIP
• Even if you press the assist mode switch (up & down)
while in Automatic mode, the assist mode cannot be
changed.
• The Automatic mode is saved when the power is
turned off. When you turn on the power again, the as-
sist mode will be in the Automatic mode.
EXPW
Assist
mode
Assist mode
indicator
HIGH
STD
ECO
+ECO
OFF
Assist
mode
Assist mode
indicator
HIGH
STD
ECO
+ECO
OFF
Assist
mode
Assist mode
indicator
Automatic
mode
1 seconds
or longer
1 seconds
or longer
PW-X drive unit PWseries SE
drive unit
PWseries TE
drive unit
Assist
mode
Assist
mode
Assist
mode
Assist mode
indicator
Assist mode
indicator
Assist mode
indicator
HIGH
EXPW
STD
ECO
+ECO
OFF
HIGH
STD
ECO
+ECO
OFF
Auto-
matic
mode
1 second
or longer
1 second
or longer
2
Speedometer
The speedometer displays your bicycle speed (in kilome-
ter per hour or mile per hour). To select the km/mile, see
“km/mile setting”.
TIP
If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the
speedometer displays “0 km/h or 0 MPH”.
Automatic mode
indicator
Speedometer
X0S7_EPAC欧州向け英語_MY19.indd 12 2018/04/04 9:29:35
• Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or longer,
the display changes as follows:
Odometer
 Trip meter  Range  Odometer
You can reset the data for trip meter.
- Odometer
This displays the total distance (in kilometers or miles) ridden
while the power was on. The odometer cannot be reset.
- Trip meter
This displays the total riding distance (in kilometers or miles) since
it was last reset. When you turn off the power, the data up to that
point will remain in the display. To reset the trip meter and begin
counting a new total, press the assist mode switch (up) and assist
mode switch (down) simultaneously for 2 seconds or longer when
the trip meter is displayed.
- Range (Remaining assist distance)
This displays an estimate of the distance (in kilometers or miles)
that can be ridden with assist on the residual battery capacity
of the battery installed. If you switch the assist mode when
the remaining assist distance is displayed, the estimate of the
distance that can be ridden with assist changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on the riding
situation (hills, headwind, etc.) and as the battery runs down.
• If in Off mode, “- - - -” is displayed.
13
2
Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the battery.
2
Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or longer,
the display changes as follows:
Odometer → Trip meter → Range → Odometer
You can reset the data for trip meter.
7
Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
7
Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the assist mode switch (up) and assist mode switch
(down) simultaneously for 2 seconds or longer when the
trip meter is displayed.
7
Range (Remaining assist distance)
This displays an estimate of the distance (in kilometers or
miles) that can be ridden with assist on the residual bat-
tery capacity of the battery installed. If you switch the as-
sist mode when the remaining assist distance is displayed,
the estimate of the distance that can be ridden with assist
changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on
the riding situation (hills, headwind, etc.) and as the
battery runs down.
• If in Off mode, “- - - -” is displayed.
Battery capacity indicator
Function display
X0S7_EPAC欧州向け英語_MY19.indd 13 2018/04/04 9:29:36
13
2
Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the battery.
2
Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or longer,
the display changes as follows:
Odometer → Trip meter → Range → Odometer
You can reset the data for trip meter.
7
Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
7
Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the assist mode switch (up) and assist mode switch
(down) simultaneously for 2 seconds or longer when the
trip meter is displayed.
7
Range (Remaining assist distance)
This displays an estimate of the distance (in kilometers or
miles) that can be ridden with assist on the residual bat-
tery capacity of the battery installed. If you switch the as-
sist mode when the remaining assist distance is displayed,
the estimate of the distance that can be ridden with assist
changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on
the riding situation (hills, headwind, etc.) and as the
battery runs down.
• If in Off mode, “- - - -” is displayed.
Battery capacity indicator
Function display
X0S7_EPAC欧州向け英語_MY19.indd 13 2018/04/04 9:29:36
13
2
Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the battery.
2
Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or longer,
the display changes as follows:
Odometer → Trip meter → Range → Odometer
You can reset the data for trip meter.
7
Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
7
Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the assist mode switch (up) and assist mode switch
(down) simultaneously for 2 seconds or longer when the
trip meter is displayed.
7
Range (Remaining assist distance)
This displays an estimate of the distance (in kilometers or
miles) that can be ridden with assist on the residual bat-
tery capacity of the battery installed. If you switch the as-
sist mode when the remaining assist distance is displayed,
the estimate of the distance that can be ridden with assist
changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on
the riding situation (hills, headwind, etc.) and as the
battery runs down.
• If in Off mode, “- - - -” is displayed.
Battery capacity indicator
Function display
X0S7_EPAC欧州向け英語_MY19.indd 13 2018/04/04 9:29:36
53 52