background image

User manual

Battery-LED rear light 

DLUX micro 

XS / 

XS stop

Scope of delivery

Proper use

The product is intended for use on bicycles with pedal assistance and serves the illumination of the road. 
This LED front light is approved according to the currently valid RTLR (StVZO). The product is intended for 
outdoor use.

Safety instructions

- Do not look into the light.
- Do not point the light directly at people or animals.
- The light beam of the LED front light must point straight in direction and may not blind other road users. 
- The light distribution may be obscured by no other attached parts or pieces of luggage, not even partially.
- The LEDs are not interchangeable. If the LED fails, the entire luminaire must be replaced.

WARNING! LIFE AND ACCIDENT HAZARD FOR INFANTS AND CHILDREN!

Never leave children unattended with the packaging material, because of suffocation danger by 
swallowing packaging parts. Always keep the device away from children. The device is not a toy! This 
device can be used by children of age 8 and over and by persons with reduced physical or mental 
capabilities or lack of experience and knowledge if they have been supervised or instructed concerning 
the safe use of the device and by understanding resulting hazards. Children are not allowed to play with 
the device. Cleaning and user maintenance should not be carried out by children without supervision. 
Do not disassemble the device. Improper repairs can cause significant risks for the user. Only have 
repairing made by qualified personnel.

adapter cable micro-USB to USB-A

-battery rear light
-mounting clip
-rubber straps

Manual_DLUX

 micro XS/ XS Stop

General notes

Assembly / disassembly

Mounting clip

Setting up: on the basis of the given saddle 

tube diameter, select one of the three positions 
on the mounting clip and insert the rubber 
strap. Place the fastening clip on the seat tube 
and place the strap in the hook on tension.

Rear light

assembly

disassembly

Slide the rear light onto the mounting clip until the 

rear light clicks into place.

Activate the release lever on both sides 

(simultaneously) and remove the rear light.

Ø

klein

Ø

mittel

Ø

groß

Operation

Switch on/off

To switch on or off, shortly press the power key.

Low battery warning

From a remaining battery capacity of 4%, a separate LED lights up in the light-

emitting light emission surface of the rear light.

Charging

The internal battery of the rear light is charged 
by a USB voltage source. The supplied adapter 
cable is plugged into the micro-USB socket on 
the underside of the rear light.

Dispose of packaging and devices in an environmentally friendly way!

Warranty conditions

Dear Customer,  You will receive a 2-year warranty on this device from the date of purchase. 

In the event of defects in this product, you have legal rights against the seller of the product. 

These legal rights are not limited by the warranty below. 

Guarantee conditions

The warranty period begins with the date of purchase. Please keep the original receipt. This 

document is required as a proof of purchase. If a defect in material or workmanship occurs 

within 2 years from the date of purchase of this product, the product will be repaired or 

replaced by us at our discretion free of charge. This warranty requires that within the 2-year 

period, the defective device and the proof of purchase (receipt) presented and briefly 

described in writing, what the defect is and when it occurred. If the defect is covered by our 

warranty, you will receive the repaired or a new product back. Repair or replacement of the 

product does not commence a new warranty period. The guarantee time is not extended by 

the guarantee. This also applies to replaced and repaired parts. Any damage and defects 

already existing at the time of purchase must be reported immediately after unpacking. After 

the warranty period incurred repairs are chargeable. 

Warranty scope

The device has been carefully produced according to strict quality guidelines and METI-

culously checked before delivery. The warranty applies to material or manufacturing defects. 

This warranty does not cover product parts that are subject to normal wear and tear and can 

be considered as wearing parts or for damage to fragile components, such as switches, 

batteries or part made of glass. This warranty is void if the product has been damaged, 

improperly used or serviced. For proper use of the product, all instructions given in the 

operating instructions must be exactly followed. Uses and actions that are advised against or 

warned against in the operating instructions are to be absolutely avoided. The product is 

intended for private and non-commercial use only. Abusive and improper handling, use of 

force and internal tampering not carried out by our authorized service branch, the warranty 

will be void. If malfunctions or other defects occur, please first contact the service 

department.

Cleaning

Clean the device only with a slightly damp, lint-free cloth. Never completely immerse the 

device under water. Do not use any corrosive or abrasive cleaners. This causes damage to 

the device. 

In  the  interest  of  environmental  protection,  when  your  product 

has  reached  the  end  of  its  life,  do  not  dispose  of  it  in  the 

household  waste  but  to  a  professional  disposal.  You  can  find 

out  about  collective  places  and  their  opening  times  by  your 

responsible management.

Cleaning

Dispose

Guarantee 

Reviews: